For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well. Consistently high performance due to self-sharpening ceramic oxide grain.
Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
Materials that can be worked:
other non-ferrous metals
Nickel-based alloys (e. g. Inconell and Hasteloy)
hard non-ferrous metal
soft non-ferrous metal
stainless steel (INOX)
grey/nodular cast iron (GG/GJL, GGG/GJS)
annealed cast iron
hardened, heat-treated steels over 1,200 N/mm2 (> 38 HRC)
steel materials with a hardness > 54 HRC
Steel, cast steel
steels up to 1,200 N/mm²
fine grinding in multiple steps
flexible shaft drive