Slípiskífa POLINOX PNER frá PFERD
Þvermál: 125 mm
Þykkt: 13 mm
Gatstærð: 22,23 mm
Grófleiki: SIC milli-mjúk - Fín
POLINOX pressed non-woven disc PNER dia. 125 mm centre hole dia. 22.23 mm medium-soft SIC fine for finishing.
POLINOX unitized discs are used for face-down grinding on speed-adjustable angle grinders. Especially well-suited to work on larger surfaces. The compressed, non-woven material is bonded to a glass-fabric base.
POLINOX unitized discs PNER consist of multiple heavily compressed, non-woven layers, which are bonded together by a special grain/resin system. The different combinations of compression, fibres, grain and the appropriate bond results in non-woven products that offer a very good surface finish, high stock removal rate and long tool life. These tools can be used for a wide range of work on surfaces, from relatively coarse grinding to preparing the surface for polishing.
Medium-hard version with increased edge strength and tool life for coarse blending and polishing tasks. Well-suited for working on edges.
Materials that can be worked:
Aluminium
Brass
Bronze
Cast steel
Cobalt-based alloys
Copper
Fibre-reinforced thermosetting plastics (GRP, CRP)
Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC)
Nickel-based alloys (e.g. Inconell and Hastelloy)
Stainless steel (INOX)
Steel materials with a hardness > 54 HRC
Steels up to 1,200 N/mm² (< 38 HRC)
Thermoplastics
Titanium
Titanium alloys
Zinc
Applications:
Cleaning
Deburring
Roughening
Step-by-step fine grinding
Structuring (matt finishing, brush matting and satin finishing)
Surface work
Drive types:
Angle grinder
Cordless angle grinder
Drive spindle
