Slípiskífa POLINOX PNER 75mm Millihörð-Fín PFERD

Slípiskífa POLINOX PNER frá PFERD
Þvermál: 75 mm
Þykkt: 6,0 mm
Gatstærð: 6,0 mm
Grófleiki: Milli-hörð - Fín A

POLINOX pressed non-woven wheel PNER dia. 75X6 mm centre hole dia. 6 mm medium-hard A fine for finishing.

POLINOX unitized wheels PNER consist of multiple heavily compressed, non-woven layers, which are bonded together by a special grain/resin system. The different combinations of compression, fibres, grain and the appropriate bond results in non-woven products that offer a very good surface finish, high stock removal rate and long tool life. These tools can be used for a wide range of work on surfaces, from relatively coarse grinding to preparing the surface for polishing.

The version for straight grinders, flexible shafts and bench grinders is particularly suitable for working on smaller surfaces.

Medium-hard version with increased edge strength and tool life for coarse deburring and cleaning applications.

Materials that can be worked:
Aluminium
Brass
Bronze
Cast steel
Cobalt-based alloys
Copper
Fibre-reinforced thermosetting plastics (GRP, CRP)
Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC)
Nickel-based alloys (e.g. Inconell and Hastelloy)
Stainless steel (INOX)
Steel materials with a hardness > 54 HRC
Steels up to 1,200 N/mm² (< 38 HRC)
Thermoplastics
Titanium
Titanium alloys
Zinc

Applications:
Cleaning
Deburring
Roughening
Step-by-step fine grinding
Structuring (matt finishing, brush matting and satin finishing)
Surface work

Drive types:
Drive spindle
Flexible shaft drive
Straight grinder