Fíberskífa COMBIDISC frá PFERD með CDR hraðlás
Þvermál: 50 mm
COMBIDISC Zirkon abrasive disc CDR dia. 50mm Z60 for hardened steel.
For coarse grinding work with a high stock removal rate and a long tool life.
The CDR clamping system has a threaded connection with male thread (plastic) on the tool side. Also suitable for the following commonly used systems: Roloc™, Lockit, Speed Lok TR, Power Lock Type III, Fastlock-System B, Roll-On.
Materials that can be worked:
Annealed cast iron
Grey/nodular cast iron (GG/GJL, GGG/GJS)
Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC)
Stainless steel (INOX)
Steel materials with a hardness > 54 HRC
Steels up to 1,200 N/mm² (< 38 HRC)
Step-by-step fine grinding
Working on edges
Work on weld seams
Cordless angle grinder
Flexible shaft drive